Disclaimer
Please read this before you rely on a structural number or a cost figure from this site.
Structural tools
The deck framing, footing, load, stair, baluster and retaining-wall tools follow the prescriptive provisions of the International Residential Code (2021 edition unless a page says otherwise) and the American Wood Council’s DCA 6 deck guide. Every check names the section it comes from. They assume:
- Single-level, rectangular, wood-framed residential decks with a 40 psf live load and 10 psf dead load (snow loads only where a tool says it supports them). No hot tubs, roofs, privacy walls or other heavy or concentrated loads.
- No. 2 grade, preservative-treated or naturally durable lumber; footings on undisturbed soil below the frost line; ledgers fastened to a sound band joist, never to masonry veneer, overhangs or open-web trusses.
- Gravity segmental retaining walls no taller than the manufacturer’s unreinforced limit. Walls retaining more than 4 ft of soil, or holding back a slope, driveway or structure, need an engineered design.
Anything outside those assumptions needs a professionally designed solution. Jurisdictions adopt different code editions and amend them, so check with your local building department; their requirements and the manufacturer’s installation instructions take precedence over this site. Get a permit where one is required, and have the work inspected.
Cost tools
Cost ranges are published national figures from the sources named on each page (checked November 2026), multiplied by a regional factor derived from Remodeling magazine’s Cost vs. Value 2025 report. They are budgeting ranges, not quotes, and exclude permits, sales tax and unusual site conditions unless a page says so. Prices change; we re-check sources yearly and date every page.
Material quantities
Quantities include the waste allowances shown and standard product sizes. Real needs depend on your layout, cuts, product and site. Check counts against your own measurements, buy from a store that accepts returns, and keep receipts.
Brands
Brand and product names identify products and published specifications only. We are not affiliated with any manufacturer or retailer named on this site. See the terms of use for the full legal terms.