Interior · Wallpaper

Wallpaper Calculator

Rolls counted by strips, the way paperhangers do it, with pattern repeat and trim allowance included.

1 Rooms
ft
ft
ft
21 ft² each
15 ft² each
Units
2 Roll
in
0 for random match
in
2 in. top + 2 in. bottom
Rolls
9
20.5 in. × 33 ft rolls
Strips per roll
3
100.0 in. per strip
Strips per room
27
48.0 ft of wall
Offcut per roll
96in
Too short for a full strip
Door widths are deducted as whole strips; windows aren’t, because you still need partial strips above and below them (9 ft of openings in total). Buy every roll from the same batch (dye lot).

Wallpaper list

Wallpaper list
ItemQtyNotes
Wallpaper rolls9same batch number
Wallpaper paste (if not pre-pasted)by the label coverage
Primer for wallcoveringone coat on new or patched walls

How the wallpaper calculator works

Area-based wallpaper calculators overbuy for plain papers and underbuy for big patterns. The reliable method counts strips. Each strip is the wall height plus a trim allowance (usually 2 in. top and bottom) plus the pattern repeat. A roll yields as many whole strips as fit in its length; the rest is waste. The wall needs as many strips as its width divided by the roll width.

Strip length = wall height + pattern repeat + trim Strips/roll = floor(roll length ÷ strip length) Strips needed = ceil((perimeter − door widths) ÷ roll width) Rolls = ceil(strips needed ÷ strips per roll)

Worked example: a 12 × 12 ft room, 8 ft walls

  • Perimeter 48 ft minus a 3 ft door: 45 ft = 540 in. ÷ 20.5 in. = 26.3 → 27 strips.
  • Plain paper: strip 96 + 4 = 100 in.; a 396 in. roll gives 3 strips → 9 rolls.
  • With a 21 in. repeat: strip 121 in., still 3 per roll → 9 rolls.
  • With a 33 in. repeat: strip 133 in., only 2 per roll → 14 rolls.

The jump from 9 to 14 rolls is why it pays to check the repeat before falling in love with a large print.

Roll sizes

Most papers sold in the U.S. today come in 20.5 in. × 33 ft rolls (often called a double roll in American sizing, and the standard European roll). Some American papers are still priced per single roll but sold in double-roll bolts; wide papers run 27 or 36 in. Enter the size on your label if it differs from the presets.

Tips

  • Prime walls with a wallcovering primer so the paper can be removed later without tearing the drywall face.
  • Start in the least visible corner, plumb a line, and work around the room; the last strip rarely matches the first perfectly.
  • Check every roll has the same batch (dye-lot) number before you cut any.
  • For a single accent wall, use the wall’s width instead of the room perimeter.

Common mistakes

  • Ordering by area. 8 ft walls and 33 ft rolls waste part of every roll; area-based counts ignore it.
  • Forgetting the repeat. A large drop-match or straight-match repeat can add a third more paper.
  • Mixing batches. Rolls from different print runs can differ visibly in color.
  • Hanging over glossy paint without primer. Paste doesn’t bond well; the paper lifts at the seams.

Ceilings and stairwells

For a papered ceiling, strips run across the shorter dimension; use the room width as the strip length and the room length as the width to cover. Stairwells have tall walls of varying height: measure each strip position’s height and treat the tallest strips separately, since they may need a whole roll each.

Questions people ask

How many rolls of wallpaper do I need for a 12×12 room?
With 8 ft walls and one door, the papered width is about 45 ft. With standard 20.5 in. × 33 ft rolls you need 27 strips; each roll gives 3 strips of 100 in. (8 ft + 4 in. trim), so 9 rolls. A large pattern repeat can cut that to 2 strips per roll and raise the order to 14 rolls.
Why not just divide wall area by roll coverage?
Because wallpaper is hung in full-height strips, and the offcut at the end of each roll is often too short to use. A 33 ft roll on 8 ft walls leaves about 8 in. of waste even with no pattern; with a repeat, the waste per strip grows. Counting strips per roll gets it right.
What is a pattern repeat?
The vertical distance before the pattern repeats. Each strip has to start at the same point in the pattern, so you add up to one full repeat to every strip. The repeat is printed on the roll label.
Should I deduct for windows?
Deduct doors (full-height openings), but not windows: you still need paper above and below them, and those short pieces rarely come from offcuts. Buy one extra roll for repairs and matching mistakes.

Related calculators

All interior tools →