Exterior · Roofing

Roofing Calculator

From the house footprint and pitch to squares, bundles, underlayment, ice barrier, drip edge and nails, with IRC slope rules checked.

Code basis: 2021 IRC R905.1–R905.2Sources

1 Roof size
Measure from
ft
ft
ft
ft
:12
6 = a 6/12 roof. Unsure? Use the roof pitch calculator.
Units
2 Materials
3 for most shingles; heavy designer lines 4–5
ft/bundle
On the wrapper
ft/bundle
On the wrapper
Roof area
14.1squares
1,409 ft²
Shingle bundles
47
15.5 sq incl. 10%
All bundles
51
+ 2 starter, 2 ridge cap
Pitch
6:12
26.6° · ×1.118
IRC R905.1.2: where there has been a history of ice forming along the eaves, an ice barrier runs from the eave edge to at least 24 in. inside the exterior wall line. Your building department says whether that applies.

Roofing materials

Roofing materials
ItemQtyNotes
Shingles (field)47 bundles3 per square
Starter strip2 bundles151 ft of eaves and rakes
Hip and ridge cap2 bundles42 ft
Underlayment (synthetic)2 rolls
Ice and water barrier2 rolls252 ft² (2-square rolls)
Drip edge, 10 ft16 pieces
Roofing nails4,1364 per shingle
Plus pipe boots, step and counter flashing, vents and roof cement: count them on the roof.

How the roofing calculator works

You don’t need to climb the roof to estimate it. For any roof where every plane has the same pitch, the sloped area equals the plan area (the footprint plus overhangs, seen from above) times the pitch multiplier. That holds for gables, hips and sheds alike; only the edges change. The calculator then works through each material the way a supplier would, from the edges as well as the area.

gable: ridge = lengthhip: ridge = length − width
Plan view: the same footprint has the same roof area at the same pitch, but a hip roof trades rakes for hips and has a shorter ridge.
Roof area = (length + 2 × overhang) × (width + 2 × overhang) × √(1 + (rise ÷ 12)²) Squares = area ÷ 100 Bundles = squares × (1 + waste) × bundles per square Starter = (eaves + rakes) ÷ starter coverage Ridge cap = (ridges + hips) ÷ cap coverage Drip edge = (eaves + rakes) ÷ 10 ft

Worked example: a 40 × 28 ft gable house, 6/12

  • Plan with 1 ft overhangs: 42 × 30 = 1,260 ft². Multiplier at 6/12: 1.118. Roof area: 1,409 ft² = 14.1 squares.
  • Field shingles at 10% waste: 15.5 squares × 3 = 47 bundles.
  • Eaves 84 ft, rakes 4 × 15 × 1.118 = 67 ft: starter for 151 ft = 2 bundles; drip edge 16 pieces.
  • Ridge 42 ft at 25 ft per bundle: 2 bundles of cap.
  • One 3 ft course of ice barrier on 84 ft of eaves (252 ft²): 2 rolls. Synthetic underlayment over the rest: 2 rolls.
  • Nails: 47 bundles × 22 shingles × 4 = about 4,100.

The same footprint as a hip roof has 144 ft of eaves, a 12 ft ridge and 90 ft of hips: more starter and cap, no rakes, and 15% waste is more realistic for the hip cuts.

Pitch rules you can’t skip

  • Asphalt shingles need at least 2/12 (IRC R905.2.2), and two layers of underlayment below 4/12.
  • Tile needs at least 2½/12; wood shingles 3/12 and shakes 4/12.
  • Above 21/12 most shingle makers require extra nails and hand sealing.

Not sure of your pitch? Measure 12 in. level from the roof surface and the vertical distance up to it, or use the roof pitch calculator.

Mistakes that cost a second delivery

  • Using the house’s living area. Garages, porches and overhangs are part of the roof.
  • Forgetting that every layer being torn off is extra disposal weight, and that most codes allow at most two layers in total (IRC R908.3.1.1 forbids a new layer over two existing ones).
  • Counting starter and cap as “waste”. They are separate products with their own coverage per bundle printed on the wrapper.
  • Mixing shingle lots. Order the whole job from one run so the color matches.

For a price, the roof replacement cost calculator applies published installed ranges for asphalt, metal and tile to the same roof size.

Questions people ask

How do I calculate roof squares from the house size?
Add the overhang to each side of the footprint, multiply length × width for the plan area, then multiply by the pitch multiplier √(1 + (rise ÷ 12)²). Divide by 100 for squares. A 40 × 28 ft house with 1 ft overhangs and a 6/12 roof: 42 × 30 × 1.118 = 1,409 ft², or 14.1 squares.
How many bundles of shingles per square?
Three for most architectural and 3-tab shingles, which is why a square is usually sold as three bundles. Some heavy designer shingles are four or five bundles per square; the wrapper says.
How much waste should I add for shingles?
About 10% for a simple gable roof, 15% for hip roofs and roofs with valleys, and up to 20% for cut-up roofs with dormers. The calculator adds waste to the field shingles only; starter and ridge cap are counted from their own edge lengths.
How many rolls of underlayment do I need?
Synthetic underlayment rolls usually cover 10 squares, #15 felt about 4 squares and #30 felt about 2 squares. Roofs from 2/12 up to 4/12 need two layers under asphalt shingles (IRC R905.1.1), which the calculator doubles automatically.
Where is ice and water shield required?
Where your jurisdiction has a history of ice dams, IRC R905.1.2 requires an ice barrier from the eave edge to a point at least 24 in. inside the exterior wall. That is usually one 36 in. course on a typical overhang, or two on wide overhangs and low slopes. Valleys commonly get it too.

Sources

  1. 2021 International Residential Code (IRC) — International Code Council, checked Nov 2026.

Related calculators

All exterior tools →