Square Footage Calculator
Add up rectangles, triangles, circles and L-shapes, subtract openings, and send the total straight to the concrete, flooring, tile, sod or paver calculators.
Formulas for every shape
Worked example: an L-shaped patio with a round fire-pit pad
- L-shape: 20 × 15 ft outline with an 8 × 5 ft notch for the house corner: 300 − 40 = 260 ft².
- Add a 10 ft circle for the fire-pit area that sticks out past the L: π × 5² = 78.5 ft².
- Subtract a 3 × 3 ft planter left in the middle: −9 ft².
- Total 329.5 ft² = 30.6 m² = 36.6 yd².
Click “Pavers” under the result and the paver calculator opens with 329.5 ft² already filled in.
Measuring tips
- Measure in feet and inches, enter in decimal feet: 7 ft 6 in. is 7.5 ft; 3 in. is 0.25 ft. Or switch to metric.
- Check rectangles are square: measure both diagonals. If they differ, the room isn’t square, and splitting it into a rectangle and a triangle is more accurate.
- For curves, treat gentle curves as a trapezoid or a series of short straight segments, or a half or quarter circle where it fits.
- Walls are different: for paint, drywall or wallpaper you need wall area (perimeter × height), which those calculators work out from the room size.
Where to use the result
Most of the toolkit starts from area. Concrete, gravel, mulch and topsoil multiply it by a depth; pavers, sod, tile and flooring divide it by a product size and add waste; cost estimators multiply it by a published price per square foot. The links under the result carry your total into each tool.
Common mistakes
- Mixing feet and inches. 10 ft 6 in. is 10.5 ft, not 10.6 ft. Convert inches by dividing by 12.
- Counting overlaps twice. When two rectangles share a corner area, subtract the overlap or split the shape so the pieces don’t overlap.
- Using a diameter as a radius. Circle area uses the radius (half the diameter); the calculator asks for the diameter to avoid the mix-up, except for quarter circles.
- Measuring to the wrong edge. For flooring measure wall to wall; for a patio measure the outside of the edging; for a roof use the roofing calculator, because pitch adds area.
Square footage of a house
For a whole house, appraisers measure the finished, heated living area from the exterior walls, floor by floor, and usually exclude garages, unfinished basements and open porches. That number is different from the floor area you would buy flooring for (measured inside the rooms) and very different from the roof or wall area. Use the measurement that matches the job.
Questions people ask
How do I calculate square footage?
How do I calculate the square footage of an L-shaped room?
How do I convert square feet to square meters?
How do I find the area of a triangle if I only know the sides?
Should I add waste to square footage?
Related calculators
All calculators tools →Concrete Calculator
Slabs, footings, columns, post holes and steps in cubic yards and 40–80 lb bags.
Flooring Cost Calculator
Vinyl plank, laminate, hardwood, carpet and tile: boxes to buy and installed cost.
Tile & Grout Calculator
Tiles and boxes with waste, grout pounds from the joint size, thinset and install cost.
Paver Calculator
Pavers by size and pattern, base gravel, bedding sand, edging and joint sand.
Sod Calculator & Cost
Pieces and pallets of sod, and the installed cost with or without soil prep.
Mulch Calculator
Yards or bags of mulch for beds and tree rings at the depth you choose.