Interior · Tile

Tile & Grout Calculator

Tiles and boxes with the right waste for your layout, grout from the actual joint volume, thinset by trowel size, and installed cost.

Costs checked: November 2026Sources

1 Area
Shape
ft
ft
Units
2 Tile
in
in
in
1/16 to 3/16 in. is common
in
ft²
Printed on the box
$/ft²
0 uses This Old House’s $3–$15 glazed ceramic range
3 Location and labor

Region factor ×1.00: U.S. national average. How it’s derived

Who does the work
Tiles
44
80 ft² + 10%
Boxes
6
15.5 ft² per box
Grout
4.2lb
1 × 25 lb or 1 × 10 lb
Thinset
2× 50 lb
1/4 × 3/8 square in. notch

Tile list

Tile list
ItemQtyNotes
Tile 12×24 in.6 boxes44 tiles
Grout1 25 lb bags4.2 lb incl. 10%
Thinset mortar2 50 lb bagscheck the bag’s chart for your trowel
Low
$504
Typical
$1,510
$18.90 per ft²
High
$2,520
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Glazed ceramic tile, incl. 10% waste88 sq ft$264$792$1,320
Tile installation labor80 sq ft$240$720$1,200
Split
Materials$264$792$1,320
Labor, equipment & overhead$240$720$1,200
Total installed$504$1,510$2,520
Labor is Angi’s $3–$15/ft². Small rooms, wall tile, mosaics and large-format tile sit at the top; demolition of old tile is extra.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

How tile and grout are calculated

Tile count uses the tile plus one joint in each direction as the repeating unit, so narrow joints and large tiles come out right. Boxes come from the box coverage, which is what you actually buy. Grout is calculated from geometry rather than a rule of thumb: every tile module has a joint along one long and one short edge, so the grout volume per module is the joint width × the joint depth × (length + width + joint width).

tile Ljointgrout = joint × depth × (L + W + joint)
Each tile brings one joint along its length and one along its width; the grout is that L-shaped strip times the tile thickness.
Tiles = area × 144 ÷ ((L + j)(W + j)) × (1 + waste) Boxes = area × (1 + waste) ÷ box coverage Grout = area × 144 × j × (L + W + j) × depth ÷ ((L + j)(W + j)) [in³] Weight = in³ × 16.39 cm³/in³ × 1.6 g/cm³ ÷ 453.6 × 1.10 (waste) [lb]

For small joints the formula reduces to the familiar grout-consumption formula used on grout bags, (L + W) ÷ (L × W) × joint × depth × density. We assume a cured grout density of 1.6 g/cm³ and add 10% for mixing and cleanup waste.

Worked example: an 8 × 10 ft bathroom floor

  • 80 ft² of 12 × 24 in. porcelain, ⅛ in. joints, straight layout: 80 × 144 ÷ (12.125 × 24.125) × 1.10 = 44 tiles; at 15.5 ft² per box, 6 boxes.
  • Grout: 0.83 in³ per ft² × 80 = 67 in³ ≈ 4.2 lb with waste: one 10 lb bag.
  • Thinset with a ¼ × ⅜ in. notch: 88 ÷ 60 = 2 bags.
  • Installed with a $3–$15 tile and $3–$15 labor: about $504 / $1,512 / $2,520 nationally.

Tips from tile setters

  • Dry-lay a row each way from the center and adjust so you don’t end with slivers at a doorway or along the tub.
  • Large-format tile (any side 15 in. or more) needs a flatter substrate and a larger notch; back-butter it.
  • Check the tile maker’s minimum joint width; rectified tile can go tighter than pressed tile.
  • Use sanded grout for wider joints and unsanded for narrow joints or polished stone, per the grout maker.

Price drivers

  • Tile choice: glazed ceramic is cheaper than porcelain, and both are cheaper than natural stone.
  • Where it goes: wall, shower and backsplash tile take more time per square foot than floors.
  • Prep: removing old tile, leveling the floor, backer board and waterproofing are often separate lines.
  • Pattern: herringbone, diagonal and mosaics multiply the cuts.

Ordering

Order all the tile at once and check that every box has the same shade and caliber code. Keep a full box after the job for repairs.

Questions people ask

How do I calculate how much tile I need?
Measure the area in square feet, add waste (about 10% for a straight layout, 15% diagonal or offset, 20% herringbone), then divide by the coverage printed on the box and round up. For a tile count, divide 144 by the tile area plus one grout joint each way.
How much grout do I need?
Grout fills the joints, so it depends on tile size, joint width and joint depth: grout volume per tile = joint × depth × (length + width + joint). For 12 × 24 in. tile with ⅛ in. joints, ⅜ in. deep, 80 ft² needs about 4 lb. One-inch mosaics with 1/16 in. joints need roughly four times as much per square foot as 12 in. tile.
How much thinset do I need?
It depends on the trowel notch, which depends on tile size. Bag charts commonly show around 90 ft² per 50 lb bag with a ¼ × ¼ in. square notch, about 60 ft² with ¼ × ⅜ in., and about 40 ft² with ½ × ½ in. for large tile. Use the chart on your bag.
How much does tile installation cost?
Angi puts tile installation labor at $3–$15 per ft². This Old House lists glazed ceramic tile at about $3–$15 per ft², so a typical installed floor (tile plus labor) runs roughly $6–$30 per ft² before demolition and prep.
Why buy extra tile?
For cuts, breakage and future repairs. Tile batches vary in shade, so buying the extra now from the same lot is far easier than matching it in five years.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. How Much Does Tile Installation Cost? — Angi, checked Nov 2026.
  2. Cost to Install Ceramic Tiles — This Old House, checked Nov 2026.
  3. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All interior tools →