Deck calculators
The flagship toolkit: plan the boards row by row, size the framing from the IRC deck tables, work out stairs, railings and fasteners, and budget the whole build.
Plan and buy
Deck Planner
Decking, framing, footings, hardware and concrete in one shopping list, with a plan drawing.
Open →Deck Board Calculator
Boards by stock length with seams placed on joists, plus screws or hidden clips.
Open →Deck Cost Calculator
Wood vs composite vs PVC tiers, railings, stairs and your region: low, typical and high.
Open →NewDeck Screw & Fastener Calculator
Deck screws or hidden clips, joist hangers, nails, ledger lags and joist tape.
Open →Metric Decking Calculator
m², linear metres and boards by length for UK, Australian and NZ decks.
Open →Deck Stain Calculator
Gallons for the deck, railings and stairs, using your product’s label coverage.
Open →Framing and structure2021 IRC R507
Joist Span Calculator
Maximum joist span and cantilever from IRC Table R507.6, and the joist count.
Open →Beam & Post Spacing
Beam size against post spacing from IRC Table R507.5, compared side by side.
Open →Footing Calculator
Footing size from tributary area and soil, plus concrete bags per hole.
Open →NewDeck Load Calculator
Total, beam and post loads in pounds, footing area for your soil, and a hot-tub check.
Open →NewPost Hole Concrete Calculator
Bags per hole with the post’s own volume taken out, plus drainage gravel.
Open →NewConcrete Calculator
Slabs, footings, columns, post holes and steps in cubic yards and 40–80 lb bags.
Open →Stairs and railingsIRC R311.7, R312
Deck Stair Calculator
Risers, treads, stringer length and throat, with a drawing to scale.
Open →NewStair Stringer Calculator
Any stair, with or without a landing: riser height, cut marks, flights and footprint.
Open →Railing & Baluster Calculator
Posts, balusters and rails with every gap kept under the 4-inch sphere rule.
Open →NewBaluster Spacing Calculator
Exact on-center spacing and layout marks for any section length and baluster size.
Open →Common project sequences
Real projects use several tools in a row. These are the orders we’d use them in.
How the deck tools fit together
The deck planner does everything at once: decking by stock length, framing from the IRC tables, footings, hardware and a shopping list you can price. The single-purpose tools answer one question each, faster, and show their working. They share the same engine, so a joist span in the planner matches the joist span calculator.
What “code-referenced” means here
The framing tools read the 2021 International Residential Code deck tables (R507) from the official ICC text, with the 2018 edition available for jurisdictions still on it. Every check names its table or section. A ✓ means your input is within the prescriptive table, not that a building department has approved it; decks outside the tables (hot tubs, roofs, very tall posts, heavy snow beyond 70 psf) need a designed solution. Always confirm with your local building department.
Guides
- How many deck boards do I need?: Why area ÷ board size undercounts, and how to plan boards by stock length.
- How to stagger deck boards (with a real cut plan): Butt-joint rules, common patterns, and a row-by-row cut plan for a 24 ft deck.
- Deck joist spacing: 12, 16 or 24 inches?: What the IRC tables allow, what decking manufacturers require, and diagonal layouts.
- Deck board gap: how far apart?: Gapping wood and composite boards, side to side and end to end, and why it changes your board count.
- Deck footing size and depth: Tributary area, soil bearing and frost depth: how the IRC footing table works.
- Deck stair rules (IRC) in plain English: Risers, treads, width, handrails, guards and stringers, with the numbers.
Reference pages: deck span tables (every IRC deck table on one printable page) and full takeoffs for 21 common deck sizes.