Paint Calculator
Gallons for walls, ceilings and trim from your rooms, and the cans to buy: pails, gallons and quarts.
Paint list
| Item | Qty | Notes |
|---|---|---|
| Wall paint | 2 gal | 1.9 gal for 2 coats |
| Trim paint (semi-gloss) | 2 qt | |
| Painter’s tape | 1 rolls (60 yd) |
How the paint calculator works
Paint is sold by coverage per coat, so the job is to measure each surface and multiply by the coats. Walls are the perimeter times the height minus the openings; ceilings are the floor area; trim is counted in linear feet (baseboard around the room plus door and window casings) at about half a square foot per foot of 6 in. trim.
Worked example: a 12 × 12 bedroom
- Walls: 48 × 8 − 21 − 30 = 333 ft² × 2 coats ÷ 350 = 1.9 gal → 2 gallons.
- Ceiling: 144 × 2 ÷ 350 = 0.82 gal → 1 gallon of ceiling paint.
- Trim: 48 + 17 + 32 = 97 ft ≈ 48.5 ft² × 2 coats ÷ 350 = 0.28 gal → 2 quarts of semi-gloss.
Tips for a better finish (and less wasted paint)
- Prime new drywall, patched areas and dramatic color changes; it saves a third coat of finish paint.
- Box your paint: mix all the gallons of one color in a bucket so slight batch differences don’t show.
- Cut in and roll one wall at a time, keeping a wet edge, to avoid lap marks.
- Flat or matte hides wall flaws; eggshell and satin clean better in kitchens, baths and hallways; semi-gloss is for trim and doors.
Common mistakes
- Using the floor area for walls. A 12 × 12 room has 144 ft² of floor but about 384 ft² of wall.
- Trusting the best-case coverage on textured or previously dark walls.
- Forgetting closets, which add wall area but rarely get counted.
Hiring a painter? The house painting cost calculator gives installed interior and exterior prices for your area. Staining a deck instead? Use the deck stain calculator.
Primer and color changes
New drywall needs a drywall primer so the finish coat doesn’t flash over the joints. Covering a dark color with a light one, or the reverse, often needs a tinted primer plus two coats. Water stains, smoke and some markers need a stain-blocking primer. The calculator figures primer at about 300 ft² per gallon for one coat; check your primer’s label.
Exterior paint
For the outside of a house, measure each wall as a rectangle, add the gables (half the width times the rise), and subtract large openings. Rough siding, stucco and masonry absorb more paint than smooth walls, so use the lower coverage number on the can. The painting cost calculator covers exterior jobs by surface type.
Quick reference
At 350 ft² per gallon and two coats, one gallon covers about 175 ft² of wall: roughly a 10 × 10 ft room with 8 ft walls needs 2 gallons, a 12 × 14 ft room about 2–3, and a 15 × 20 ft living room about 3–4 before doors and windows are subtracted.
Questions people ask
How much paint do I need for a 12×12 room?
How many square feet does a gallon of paint cover?
Do I need two coats?
When should I buy a 5-gallon bucket?
How much should I deduct for doors and windows?
Related calculators
All interior tools →House Painting Cost Calculator
Interior and exterior painting cost by area, scope and surface, labor split out.
Drywall Calculator
Sheets, screws, tape and mud from your rooms, plus hang-and-finish installation cost.
Wallpaper Calculator
Rolls from strips per roll, pattern repeat and wall height, not from area.
Deck Stain Calculator
Gallons for the deck, railings and stairs, using your product’s label coverage.
Tile & Grout Calculator
Tiles and boxes with waste, grout pounds from the joint size, thinset and install cost.
Flooring Cost Calculator
Vinyl plank, laminate, hardwood, carpet and tile: boxes to buy and installed cost.