Outdoor · Landscape

Gravel Calculator

Area × depth to cubic yards, tons and bags, with a compaction allowance and an editable weight per yard for your supplier’s stone.

1 Area
Shape
ft
ft
Units
2 Depth and material
in
2–3 in. decorative; 4–6 in. base
%
Use 10–20% for base that you compact
t/yd³
Ask your supplier for theirs
Cubic yards
1.22yd³
0.93 m³
Weight
1.71tons
at 1.4 t/yd³
Cubic feet
33.0ft³
120 ft² × 3.00 in
0.5 ft³ bags
66
Bulk is usually sold by the yard (or ton). At 1.2 yd³ you would need 66 bags of 0.5 ft³; compare a bulk delivery price.

Gravel order

Gravel order
ItemQtyNotes
Crushed stone (#57, 3/4 in. clean)1.25 yd³1.71 tons at 1.4 t/yd³
or bagged, 0.5 ft³ bags66

Yards, tons and why suppliers disagree

Gravel is measured by volume where it goes but often sold by weight at the yard. The calculator works out the volume exactly (area × depth), then converts to weight with a tons-per-yard figure you can change. That figure is the soft spot in every gravel estimate: wet stone weighs more than dry, crushed stone with fines packs denser than clean stone, and different quarries produce different rock. Our defaults (1.4 t/yd³ for crushed stone, 1.5 for road base, 1.35 for river rock) are starting points; ask the yard what conversion it uses and type it in.

Cubic feet = area × depth (in) ÷ 12 Cubic yards = cubic feet × (1 + allowance) ÷ 27 Tons = cubic yards × tons per yard Bags = cubic feet ÷ bag size (0.5 ft³ is common)

Worked examples

Driveway top-up, 50 × 12 ft at 4 in.: 600 × 4 ÷ 12 = 200 ft³; +10% = 220 ft³ = 8.15 yd³ = about 11.4 tons at 1.4 t/yd³. That is a full tri-axle load in many areas; ask about delivery minimums.

Pea-gravel path, 30 × 3 ft at 2 in.: 90 × 2 ÷ 12 = 15 ft³ = 0.56 yd³ = 0.78 tons, or 30 bags of 0.5 ft³. At this size bags are practical; above about a yard, bulk usually wins.

Choosing the stone

  • Crushed stone with fines (crusher run, road base, ¾ in. minus): locks together when compacted. Use it under pavers, slabs, sheds and as a driveway base.
  • Clean crushed stone (#57, ¾ in.): drains freely. Use it for drainage zones, behind retaining walls and under post holes.
  • Pea gravel and river rock: rounded and comfortable underfoot, but they roll. Edge them firmly and keep paths to 2–3 in. deep.

Mistakes to avoid

  • Spreading base material loose and measuring that as the finished depth. Compact in 2–3 in. lifts; a 4 in. compacted layer starts closer to 5 in. loose.
  • Skipping landscape fabric under decorative stone on soil. Without it the stone sinks into the mud within a season.
  • Ordering by the bag for big areas. Forty 0.5 ft³ bags is less than a yard.

Laying pavers? The paver calculator includes the base and bedding sand. Building a retaining wall? The retaining wall calculator counts both base and drainage stone.

Delivery tips

A dump truck needs a firm, clear path and room to raise its bed; ask where it can tip without damaging the driveway or lawn. Spread from the pile with a wheelbarrow and rake, and order a little extra rather than paying a second delivery fee for half a yard.

Quick reference: one cubic yard of gravel covers

  • About 324 ft² at 1 in. deep.
  • About 162 ft² at 2 in.
  • About 108 ft² at 3 in.
  • About 81 ft² at 4 in.

Questions people ask

How much gravel do I need for a driveway?
A 50 × 12 ft driveway with 4 in. of crushed stone is 200 ft³; with 10% for compaction and spread that is 8.15 yd³, about 11.4 tons at 1.4 tons per yard. Gravel driveways are usually built in layers: larger stone for the base and a finer top layer.
How many tons are in a cubic yard of gravel?
Roughly 1.3–1.5 tons for most gravel and crushed stone, depending on the rock, the size range and how wet it is. The calculator defaults to 1.4 for clean crushed stone and 1.5 for road base that contains fines, but the supplier’s own conversion is the one that counts on the invoice.
How much area does a ton of gravel cover?
At 1.4 tons per yard, one ton is about 0.71 yd³ (19.3 ft³). That covers about 116 ft² at 2 in. deep, 77 ft² at 3 in., or 58 ft² at 4 in.
How deep should gravel be?
Decorative paths and beds: 2–3 in. of pea gravel or small stone. Base under pavers or a shed: 4–6 in. of compacted crushed stone (more on clay). Gravel driveways: 4–6 in. or more in layers, depending on the soil and traffic.
Should I add extra for compaction?
Yes for base material: crushed stone with fines compacts noticeably, so order 10–20% more than the finished depth implies. Clean decorative stone barely compacts; 5% for spreading losses is enough.

Related calculators

All outdoor tools →