Exterior · Driveway cost

Driveway Cost Calculator

Concrete and asphalt side by side for your driveway size and region, including what each costs per year of service.

Costs checked: November 2026Sources

1 Driveway
ft
ft
10–12 ft single, 20–24 ft double
yr
yr
2 Location

Region factor ×1.00: U.S. national average. How it’s derived

Low
$3,840
Typical
$6,240
$13.00 per ft²
High
$8,640
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Concrete480 sq ft$3,840$6,240$8,640
Total installed$3,840$6,240$8,640
The sources publish installed prices only for some lines here, so we don’t split those into materials and labor rather than guess.
The table above is the concrete driveway. Angi’s 2026 figures: asphalt new $7–$13/ft², replacement $8–$15, overlay $3–$7; concrete $8–$18. Lifespans are your inputs: Angi notes concrete can last roughly twice as long with less upkeep, while asphalt needs sealing every few years.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

Asphalt vs concrete

Asphalt, new
$4,800

$3,360 – $6,240 · $240 per year over 20 yr

Concrete
$6,240

$3,840 – $8,640 · $156 per year over 40 yr

How the comparison works

Both materials are priced per square foot installed. The calculator applies Angi’s 2026 ranges to your driveway area for the asphalt job you choose and for concrete, then your regional factor. The breakdown table shows concrete; the comparison panel shows both, and divides each typical cost by the lifespan you enter so you can compare cost per year.

Cost = length × width × $/ft² × regional factor Per year = typical cost ÷ expected life (your input)
JobInstalled per ft²
Asphalt, new$7 – $13
Asphalt, tear out and replace$8 – $15
Asphalt overlay$3 – $7
Concrete$8 – $18

Worked example: 40 × 12 ft single driveway

  • Area 480 ft². New asphalt: $3,360 / $4,800 / $6,240. Concrete: $3,840 / $6,240 / $8,640.
  • With lifespans of 20 years (asphalt) and 40 (concrete), typical cost per year is $240 vs. $156: concrete is cheaper per year if it really lasts twice as long, before sealing costs for asphalt.
  • If you expect to move in 8 years, the upfront difference matters more than the lifespan.

What moves the price

  • Demolition and hauling of an old driveway, and grading or extra base on soft ground.
  • Thickness and reinforcement for heavy vehicles such as RVs and trucks.
  • Finish: stamped, colored or exposed-aggregate concrete costs well above plain broom finish.
  • Apron and permits: work in the public right-of-way often needs a permit and a specified apron detail.
  • Drainage: trench drains, culverts or regrading to keep water off the garage.

Tips

  • Asphalt plants and crews are seasonal; schedule paving in warm weather, and ask about a discount if a neighbor paves the same day.
  • For concrete, ask for control-joint spacing in the quote; joints decide where cracks go.
  • For a gravel driveway instead, use the gravel calculator for tons of stone.

Measuring a driveway

Measure the length from the garage or parking pad to where the driveway meets the street, and the width at a few points. Flared aprons and parking bump-outs are easiest to add in the square footage calculator as separate rectangles and triangles; enter the total as length × width with the same area. The portion in the public right-of-way may follow the town’s specification and permit.

Maintenance costs over time

Asphalt is commonly sealcoated every few years and needs crack filling as it ages; an overlay can extend its life when the base is sound. Concrete needs joint and crack sealing, and in snowy climates protection from deicing salts in its first winters. The cost-per-year comparison above covers installation only; add your expected maintenance if you want the full picture.

Questions people ask

How much does an asphalt driveway cost per square foot?
Angi’s 2026 figures: $7–$13 per ft² for a new asphalt driveway, $8–$15 to tear out and replace one, and $3–$7 for an overlay on sound existing asphalt.
How much does a concrete driveway cost?
Angi’s 2026 range for concrete driveways is $8–$18 per ft². A 40 × 12 ft single-car driveway (480 ft²) is about $3,840–$8,640, typically $6,240, before the regional factor.
Is asphalt or concrete cheaper over time?
Asphalt is usually cheaper to install; concrete usually lasts longer and needs less upkeep, though asphalt needs sealing every few years. The calculator divides each cost by the lifespan you expect to compare cost per year. Climate matters: freeze–thaw cycles and road salt are hard on concrete, and very hot sun softens asphalt.
How thick should a driveway be?
Concrete driveways are commonly 4 in. for cars and 5–6 in. for heavier vehicles, on a compacted gravel base. Asphalt is commonly 2–3 in. of compacted asphalt over a 4–8 in. aggregate base. Your local code or HOA may specify more.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. How Much Does It Cost to Pave a Driveway? — Angi, checked Nov 2026.
  2. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All exterior tools →