Outdoor · Hardscape cost

Paver Installation Cost Calculator

Installed paver patio cost from the size and your ZIP code, with low, typical and high figures from published national prices.

Costs checked: November 2026Sources

1 Patio
Shape
ft
ft
2 Location and labor

Region factor ×1.00: U.S. national average. How it’s derived

Who does the work
Low
$2,280
Typical
$3,350
$11.96 per ft²
High
$6,950
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Paver patio, installed280 sq ft$2,280$3,350$6,950
Total installed$2,280$3,350$6,950
The sources publish installed prices only for some lines here, so we don’t split those into materials and labor rather than guess.
Small patios cost more per square foot: delivery, equipment and setup are spread over fewer square feet.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

Where the numbers come from

Lawn Love publishes a national range for a typical 280 ft² paver patio: $2,275 at the low end, $6,950 at the high end, and a $3,350 average. We turn that into a per-square-foot range by dividing by 280, so it scales to your patio: $8.13 / $11.96 / $24.82 per ft². Then we multiply by your region’s factor, derived from the Cost vs. Value 2025 report (see the methodology).

Installed = area × [$8.13 · $11.96 · $24.82] × regional factor

We don’t split this into materials and labor: the source publishes installed totals only, and a split would be a guess. For a DIY budget, count materials with the paver calculator and price them at your local yard.

Worked example: a 20 × 14 ft patio in Ohio

280 ft² × $8.13 / $11.96 / $24.82 = $2,276 / $3,349 / $6,950 nationally. Ohio is in the East North Central division (factor 0.975), giving about $2,220 / $3,270 / $6,780.

What pushes a quote up or down

  • Paver choice: plain concrete pavers cost less than clay brick, and both cost less than natural stone such as flagstone or travertine.
  • Pattern and shape: herringbone, borders, curves and circles mean more cuts and more labor.
  • Soil and grade: clay soils, slopes and poor drainage need deeper base, fabric or drainage pipe.
  • Access: if a skid steer can’t reach the back yard, excavation and base go in by wheelbarrow.
  • Extras: seat walls, steps, lighting, sealing and removal of an old patio.

Getting comparable quotes

  • Give every installer the same drawing: size, paver line, pattern, border, base depth, edging type and joint sand.
  • Ask for the base depth in writing. It is the single biggest difference between a patio that lasts and one that heaves.
  • Ask who handles drainage and grading, and whether permits are needed in your town.

Pavers vs. concrete vs. a deck

For the same outdoor floor, a plain concrete slab is usually the cheapest to install (see the slab cost calculator), pavers cost more but can be lifted and relaid when roots or settling move them, and a ground-level deck (see the deck cost calculator) can make sense on sloped sites where a patio would need retaining walls. Price all three for your size before deciding: the cheapest surface on a flat site isn’t always the cheapest on yours.

Doing it yourself

Paver patios are one of the more DIY-friendly hardscape jobs, but the work is mostly excavation and base. Budget for a plate compactor and a wet saw rental, tons of base gravel moved by wheelbarrow, and time. Mistakes in the base show up as dips a year later, so if you DIY, rent the compactor for the base, not just the pavers.

Questions people ask

How much does a paver patio cost per square foot?
Lawn Love prices a typical 280 ft² paver patio at $2,275–$6,950, averaging $3,350. Divided by the area that is about $8–$25 per ft² installed, typically about $12, before any regional adjustment.
How much does a 12×12 paver patio cost?
144 ft² at $8.13–$24.82 per ft² is about $1,170–$3,570, typically about $1,720 nationally. Small patios tend toward the higher end per square foot because delivery and setup don’t shrink with the job.
Are pavers cheaper than a concrete patio?
Usually not up front: a plain 4 in. slab is often quoted at $3–$10 per ft² installed versus roughly $8–$25 for pavers. Pavers can be repaired one piece at a time and don’t crack across the whole surface, which is why many people pay the difference. Compare both with the concrete slab cost calculator.
What’s included in the installed price?
Normally excavation, compacted base, bedding sand, pavers, cutting, edge restraint, joint sand and compaction. Steps, walls, curves, drainage, removing an old patio and difficult access are typically extra; ask each installer to itemize them.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. Paver Patio Cost — Lawn Love, checked Nov 2026.
  2. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All outdoor tools →