Fence Cost Calculator
Installed fence cost by material and length, with labor separated out and your region applied.
| Item | Quantity | Low | Typical | High |
|---|---|---|---|---|
| Wood (privacy or picket) | 150 lin ft | $1,500 | $4,130 | $6,750 |
| Split | ||||
| Materials | $750 | $2,630 | $4,500 | |
| Labor, equipment & overhead | $750 | $1,500 | $2,250 | |
| Total installed | $1,500 | $4,130 | $6,750 | |
Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.
How the estimate works
Fence contractors quote by the linear foot, installed. The calculator multiplies your length by the published range for the material you choose, then applies your regional factor. Because Inch Calculator publishes a separate labor figure ($5–$15 per foot), we can split each estimate into labor and materials: materials are the installed price minus labor.
Published ranges we use
| Material | Installed per ft | Source |
|---|---|---|
| Wood (privacy or picket) | $10 – $45 | Angi, 2026 |
| Chain link | $8 – $40 | Angi, 2026 |
| Vinyl privacy, 6 ft | $30 – $55 | Inch Calculator |
| Vinyl picket, 4 ft | $15 – $35 | Inch Calculator |
| Aluminum | $20 – $55 | Inch Calculator |
Worked example: 150 ft of wood privacy fence in Texas
150 × $10 / $27.50 / $45 = $1,500 / $4,125 / $6,750 nationally, of which labor is $750 / $1,500 / $2,250. Texas is in the West South Central division (factor 0.901): about $1,350 / $3,720 / $6,080.
What drives fence prices
- Height and style: a 6 ft privacy fence uses far more material per foot than a 4 ft picket fence; board-on-board and shadowbox styles use more again.
- Terrain: slopes, rock and roots slow digging; rock can require a jackhammer or core drill.
- Gates: each walk or drive gate adds framing, heavy hinges and a latch; double drive gates cost much more than a walk gate.
- Removal: tearing out and hauling an old fence is usually a separate line item.
Saving money
- Pre-clear the line (plants, debris, old fence) yourself and ask for a quote without removal.
- Use standard heights and post spacing that match stock lumber or panel sizes.
- Share the cost with a neighbor where the fence is on the common line, if local rules and both of you agree.
Building it yourself? Count every post, rail and picket with the fence calculator.
DIY vs. hiring out
Because labor is roughly $5–$15 per foot, a 150 ft DIY fence saves about $750–$2,250 in labor, but you take on renting a two-person auger, mixing about 40 bags of concrete, and setting posts dead plumb and in line. Many homeowners split the job: they pay a crew to set posts in concrete (the hardest part to get right) and hang rails and pickets themselves.
Reading a fence quote
- Check the post size, spacing and depth, and whether posts are set in concrete.
- Confirm the picket and rail grade, and the fastener type (galvanized or stainless).
- Ask whether removal of the old fence, gates and hauling are included.
- Ask who calls 811 and who confirms the property line.
Questions people ask
How much does a fence cost per foot?
How much does 150 feet of wood fence cost?
How much of a fence quote is labor?
Is vinyl more expensive than wood?
Do I need a permit for a fence?
Sources
Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.
- How Much Does Fence Installation Cost? (2026 data) — Angi, checked Nov 2026.
- Cost to Install a Fence — Inch Calculator, checked Nov 2026. Page shows “Updated Jul 7, 2023”; used for vinyl and aluminum ranges and the $5–$15/ft labor figure.
- Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.
Related calculators
All outdoor tools →Fence Calculator
Posts, rails, pickets and post-hole concrete for any length, corners and gates.
Post Hole Concrete Calculator
Bags per hole with the post’s own volume taken out, plus drainage gravel.
Retaining Wall Cost Calculator
Installed cost per square foot of wall face for eight wall materials.
Deck Cost Calculator
Wood vs composite vs PVC tiers, railings, stairs and your region: low, typical and high.
Concrete Calculator
Slabs, footings, columns, post holes and steps in cubic yards and 40–80 lb bags.
Concrete Slab Cost Calculator
Installed slab cost or ready-mix by the yard, any thickness, adjusted for your region.