Retaining Wall Cost Calculator
Installed cost by wall material from the length and exposed height, adjusted for your region.
| Item | Quantity | Low | Typical | High |
|---|---|---|---|---|
| Interlocking (segmental) block | 90 sq ft face | $1,350 | $2,250 | $3,150 |
| Total installed | $1,350 | $2,250 | $3,150 |
Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.
How the estimate works
Wall builders price by the square foot of finished face. The calculator multiplies length × exposed height by LawnStarter’s published range for the material you pick, and applies your Cost vs. Value regional factor. The published figures are installed totals, so materials and labor aren’t split here; the retaining wall calculator gives the DIY materials list.
Material ranges (installed, per ft² of face)
| Material | Low | High | Notes |
|---|---|---|---|
| Interlocking (segmental) block | $15 | $35 | Most common DIY-friendly system |
| Landscape block | $15 | $60 | Wide range of styles |
| Cinder (CMU) block | $15 | $40 | Needs footing, rebar, veneer or stucco |
| Poured concrete | $20 | $40 | Forms and reinforcement; strong and slim |
| Wood / timber | $13 | $35 | Shortest life |
| Brick | $17 | $43 | |
| Natural stone | $20 | $90 | Dry-stacked or mortared |
| Gabion | $10 | $40 | Wire baskets filled with stone |
Worked example
A 30 ft wall, 3 ft exposed, in interlocking block: 90 ft² × $15 / $25 / $35 = $1,350 / $2,250 / $3,150 nationally. In the Pacific division (factor 1.067) that is about $1,440 / $2,400 / $3,360.
Cost drivers
- Height. Above 4 ft, engineering, geogrid and permits add cost that isn’t in a per-foot range. IRC R404.4 requires design over 48 in. of unbalanced fill.
- Access and soil. Machines speed excavation; hand-digging clay or rock doubles labor.
- Curves, steps and corners need more cutting and special units.
- Drainage. A proper drainage zone and pipe are part of a good quote, not an upgrade.
Two short terraced walls set well apart can avoid the engineering that one tall wall needs, and often look better. Ask your installer and building department whether the spacing in your plan counts as separate walls.
Choosing a material for the budget
On a tight budget, timber or segmental block keeps the per-foot cost low; timber is the cheapest but has the shortest life. Interlocking segmental block is the usual middle ground and the friendliest for DIY. Poured concrete and natural stone sit higher, but stone covers a very wide range: a dry-stacked wall from local fieldstone can be far cheaper than cut, mortared stone.
DIY or hire?
A short, straight garden wall in segmental block is a reasonable DIY project if you can excavate, compact a base and keep the first course perfectly level. Hire out walls near the 4 ft limit, walls on slopes or near driveways and structures, and anything that needs geogrid or engineering. Use the retaining wall calculator to price DIY materials against these installed ranges.
Questions people ask
How much does a retaining wall cost per square foot?
Why price per square foot of face instead of per foot of length?
How much does a 30 ft × 3 ft block retaining wall cost?
What isn’t included in these ranges?
Sources
Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.
- How Much Does a Retaining Wall Cost? — LawnStarter, checked Nov 2026.
- Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.
- 2021 International Residential Code (IRC) — International Code Council, checked Nov 2026.
Related calculators
All outdoor tools →Retaining Wall Calculator
Blocks, caps, base and drainage stone, with permit and engineering flags.
Paver Installation Cost Calculator
Installed paver patio cost by size and region, with a DIY materials list.
Fence Cost Calculator
Wood, vinyl, chain link and aluminum fence cost per foot, split into materials and labor.
Concrete Slab Cost Calculator
Installed slab cost or ready-mix by the yard, any thickness, adjusted for your region.
Concrete Calculator
Slabs, footings, columns, post holes and steps in cubic yards and 40–80 lb bags.
Post Hole Concrete Calculator
Bags per hole with the post’s own volume taken out, plus drainage gravel.