Interior · Flooring cost

Flooring Cost Calculator

Installed cost for five floor types from your room size and region, with materials and labor split where the sources allow, and the boxes to buy.

Costs checked: November 2026Sources

1 Room
Shape
ft
ft
2 Flooring
%
5–10% straight; 15% diagonal
ft²
3 Location and labor

Region factor ×1.00: U.S. national average. How it’s derived

Who does the work
Low
$504
Typical
$1,090
$6.50 per ft²
High
$1,680
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Luxury vinyl plank168 sq ft$504$1,090$1,680
Split
Materials$84.00$378$672
Labor, equipment & overhead$420$714$1,010
Total installed$504$1,090$1,680
Subfloor leveling, moving furniture, stairs and baseboard replacement are extra.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

Flooring to buy

Flooring to buy
ItemQtyNotes
Luxury vinyl plank10 boxes200 ft² bought for 168 ft²
Underlayment (if not attached)2 rolls of 100 ft²
Transitions and quarter roundmeasure doorways and walls

How the estimate works

Each floor type uses the most specific published range we could source, multiplied by your room area and regional factor. Where a source publishes labor or materials separately, the result splits them; where it doesn’t, we show installed totals only rather than guess.

FloorInstalled per ft²SplitSource
Luxury vinyl plank$3 – $10labor $2.50–$6HomeAdvisor
Laminate$3 – $13materials $1–$5Angi
Hardwood$6 – $25not publishedHomeAdvisor
Carpet$3 – $11not publishedAngi, HomeAdvisor
Ceramic tile$6 – $30tile $3–$15 + labor $3–$15This Old House, Angi
Remove old floor$1 – $5HomeAdvisor

Worked example: a 14 × 12 ft living room in LVP

  • 168 ft² × $3 / $6.50 / $10 = $504 / $1,092 / $1,680, of which labor is $420 / $714 / $1,008.
  • Removing old carpet adds 168 × $1–$5: total about $672 / $1,596 / $2,520.
  • Boxes: 168 × 1.10 ÷ 20 ft² per box = 10 boxes (200 ft²).
  • Same room in carpet: one 12 ft strip × 14 ft = 168 ft² = 18.7 yd², no seam.

Picking a floor

  • LVP: waterproof cores suit kitchens, baths and basements; thicker wear layers last longer.
  • Laminate: hard-wearing and inexpensive; most products don’t tolerate standing water.
  • Hardwood: can be refinished several times; engineered boards are more stable over concrete and radiant heat.
  • Carpet: warm and quiet; seams and roll width drive how much you buy.
  • Tile: the most durable in wet areas, and the most labor per square foot.

Costs people miss

  • Subfloor repair and leveling: floating floors need a flat base, and hardwood needs a sound one.
  • Moving furniture and appliances, removing toilets, and trimming doors.
  • Transitions, thresholds, stair nosings and new baseboard or quarter round.
  • Acclimation time for hardwood and some laminates: the boxes need days in the room before installation.

Worked example: carpet in a wide room

A 15 × 14 ft bedroom is 210 ft², but carpet comes on 12 ft rolls. Laying strips along the 15 ft side takes two widths (12 ft + a 2 ft fill), and to keep the pile running the same direction the fill is cut from a second full-width strip: 2 × 15 × 12 = 360 ft² (40 yd²) bought for 210 ft² installed. Installers sometimes reduce that by planning seams across several rooms at once, so ask for their cut plan when you get a quote.

Saving money

  • Do the demolition and furniture moving yourself, and ask for an install-only price.
  • Floating floors (LVP and laminate) install fastest; glue-down and nail-down floors cost more labor.
  • Keep the same floor through connected rooms to cut transitions and waste.

Questions people ask

How much does vinyl plank flooring cost to install?
HomeAdvisor’s LVP/LVT guide puts luxury vinyl plank at a typical $3–$10 per ft² installed, with labor at $2.50–$6 per ft². A 12 × 14 ft room (168 ft²) is about $500–$1,680, typically $1,090, before removing the old floor.
How much does laminate flooring cost installed?
Angi puts laminate at $3–$13 per ft² installed, with materials of $1–$5 per ft² (thicker 12 mm styles at the top). That is about $500–$2,180 for a 168 ft² room.
How much does hardwood flooring cost?
HomeAdvisor lists installed hardwood at $6–$25 per ft², depending on species, solid vs. engineered, and whether it is prefinished or site-finished.
How much does carpet installation cost?
Angi and HomeAdvisor both put carpet at about $3–$11 per ft² installed. Carpet comes off 12 ft wide rolls, so rooms wider than 12 ft need a second strip and a seam; the calculator shows what you would actually buy.
How much extra flooring should I buy?
About 5–10% for straight plank layouts in simple rooms, 15% for diagonal or herringbone, and more for many small rooms and closets. Buy full boxes and keep one or two for repairs.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. How Much Does LVT or LVP Flooring Cost to Install? — HomeAdvisor, checked Nov 2026.
  2. How Much Does Laminate Flooring Installation Cost? — Angi, checked Nov 2026.
  3. How Much Does Hardwood Floor Installation Cost? — HomeAdvisor, checked Nov 2026.
  4. How Much Does Replacing a Carpet Cost? — Angi, checked Nov 2026.
  5. How Much Does It Cost to Replace Carpet? — HomeAdvisor, checked Nov 2026.
  6. Cost to Install Ceramic Tiles — This Old House, checked Nov 2026.
  7. How Much Does Tile Installation Cost? — Angi, checked Nov 2026.
  8. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All interior tools →