Interior & exterior · Painting cost

House Painting Cost Calculator

Interior or exterior painting cost from your rooms or walls, with labor separated and your region applied.

Costs checked: November 2026Sources

1 Job
Painting
ft²
2 Location and labor

Region factor ×1.00: U.S. national average. How it’s derived

Who does the work
Low
$3,600
Typical
$4,950
$2.75 per ft² of floor
High
$10,800
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Interior, walls only1,800 sq ft of floor$3,600$4,950$10,800
Split
Materials$720$990$2,160
Labor, equipment & overhead$2,880$3,960$8,640
Total installed$3,600$4,950$10,800
Angi’s averages are about $2.75/ft² for walls only and $4.70 with trim and ceilings, within a $2–$6 range; we apply them to the floor area of the rooms painted. Labor is 70–90% of the bill (Angi), so DIY mostly saves labor. For gallons, use the paint calculator.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

How the estimate works

Painters quote interiors in different ways, so the calculator offers the two bases Angi publishes. By floor area, Angi’s averages are about $2.75 per ft² for walls only and $4.70 with trim and ceilings, inside a $2–$6 range. By wall area, its surface table gives $1–$2 per ft². Exteriors are priced per square foot of wall by surface type. Because Angi states that labor is 70–90% of the bill, we split each estimate at the midpoint, 80% labor and 20% paint and supplies.

Interior = floor area × $2 · $2.75 (or $4.70) · $6 or wall area × $1 · $1.50 · $2 Exterior = perimeter × wall height × $/ft² for your surface Labor = 80% of the total (Angi: 70–90%) × regional factor

Worked examples

Interior, 1,800 ft² of rooms, walls only: 1,800 × $2 / $2.75 / $6 = $3,600 / $4,950 / $10,800; about $3,960 of the typical figure is labor.

Exterior, 180 ft perimeter × 18 ft, vinyl siding: 3,240 ft² × $1.25 / $2.13 / $3 = $4,050 / $6,890 / $9,720. Gables and trim detail push real quotes up; measure gables separately if you want them included.

What drives a painting quote

  • Prep: patching, sanding, caulking, scraping and priming.
  • Scope: ceilings, trim, doors, cabinets and color changes each add time.
  • Height and access: stairwells, vaulted ceilings and second-story exteriors.
  • Paint quality: premium paint costs more per gallon but can save a coat.
  • Occupied rooms: moving and covering furniture takes time; empty rooms are cheaper.

Saving money

  • Do the prep and moving yourself and ask for a paint-only price.
  • Keep the same color where you can; color changes often need primer and an extra coat.
  • Group rooms into one job rather than several small visits with minimum charges.

Doing it yourself? Work out gallons with the paint calculator.

Interior or exterior first?

Exterior painting depends on the weather, so it is usually scheduled for spring through early fall when temperatures and humidity suit the paint. Interior work can happen year-round, and painters are often easier to book in the off-season. If you are doing both, plan the exterior for the dry season and fill the gaps with interior rooms.

Reading painting quotes

  • Confirm the number of coats, the paint line and the sheen for each surface.
  • Ask what prep is included: patching, caulking, sanding, priming bare wood, scraping.
  • For homes built before 1978, ask about lead-safe practices; certified renovators must follow EPA rules.
  • Ask whether moving furniture, covering floors and cleanup are included.

Questions people ask

How much does it cost to paint a house exterior?
Angi’s 2026 figures run about $1.50–$4 per ft² of exterior wall, by surface: vinyl or wood siding about $1.25–$3, stucco $1.50–$4, brick $1.50–$2.50. A house with 180 ft of perimeter and 18 ft walls (3,240 ft²) is roughly $4,050–$9,720 in siding, before the regional factor.
How much does interior painting cost per square foot?
Angi puts interior painting at $2–$6 per ft², averaging about $2.75 for walls only and $4.70 with trim and ceilings. We apply that to the floor area of the rooms painted. Angi’s surface table prices walls alone at $1–$2 per ft² of wall area, which the calculator offers as a second basis.
How much of a painting quote is labor?
Most of it: Angi says labor is 70–90% of a painting project. That’s why painting is one of the most DIY-friendly ways to save, provided you are comfortable with prep, ladders and cutting in.
What makes exterior painting expensive?
Prep and access: scraping, sanding, caulking, repairing rotted trim and priming bare wood take longer than painting, and two-story walls need ladders or scaffolding. Lead-safe work practices are required on homes built before 1978.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. Interior and Exterior Painting Costs — Angi, checked Nov 2026.
  2. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All interior tools →