Outdoor · Structures

Pergola Cost Calculator

Pergola cost from the covered area and material, with published averages and your regional factor.

Costs checked: November 2026Sources

1 Pergola
ft
ft
2 Location

Region factor ×1.00: U.S. national average. How it’s derived

Low
$2,340
Typical
$4,320
$30.00 per ft²
High
$7,010
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Cedar pergola144 sq ft$2,340$4,320$7,010
Total installed$2,340$4,320$7,010
The sources publish installed prices only for some lines here, so we don’t split those into materials and labor rather than guess.
Lawn Love’s average for cedar is $30 per ft² of covered area; the low and high scale the national $20–$60 spread around it ($16.22–$48.65). Louvered or retractable roofs, footings in rock and electrical work are extra.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

How the estimate is built

Lawn Love publishes a typical installed range of $20–$60 per square foot of covered area (average $37), and an average per square foot for each material. We use the material’s average as “typical” and scale the national spread around it: low = average × 20/37 and high = average × 60/37. That keeps the shape of the published range without inventing material-specific lows and highs the source doesn’t give. Your regional factor is applied last.

Typical = area × material average Low = typical × 20 ÷ 37 High = typical × 60 ÷ 37 × regional factor

Worked example: a 12 × 12 ft cedar pergola

144 ft² × $30 = $4,320 typical, with a range of about $2,340–$7,010 nationally. In New England (factor 1.03), about $4,450 typical.

Choosing a material

  • Pressure-treated pine is the budget choice; it needs stain or paint to look good and to slow checking.
  • Cedar and redwood resist decay naturally and look better unfinished, at a premium.
  • Vinyl and aluminum are low maintenance; aluminum kits often add louvered or retractable roofs.
  • Fiberglass columns and beams span farther and last long, at the top of the range.

Costs outside the range

  • Footings. Posts need footings below the frost line; in rock or on a slope they cost more. The post hole concrete calculator sizes the concrete.
  • Roofs and shade. Louvered roofs, polycarbonate panels or fabric shades add substantially.
  • Electrical. Fans, lights and heaters need a licensed electrician and permit.
  • Permits. Many towns require a permit for pergolas over a certain size or attached to the house.

Kit or custom?

Pergola kits come with pre-cut beams, rafters and hardware; you supply the footings and the labor. They suit standard sizes and DIY installs. Custom pergolas are designed to your space, attached to the house or deck, and sized for spans and loads; they cost more but integrate better with the house. Either way, the posts are the structural part: they need footings below the frost line and a connection that resists wind uplift.

Common mistakes

  • Bolting a pergola to an existing deck that wasn’t designed for it. The deck’s footings and framing may not carry the added weight and uplift; check with the deck load calculator and your building department.
  • Undersized beams that sag over long spans; keep spans modest or use deeper members.
  • Ignoring setbacks and height limits; many towns regulate accessory structures.

Sizing a pergola

Size the pergola to the furniture under it, with room to walk around: about 10 × 10 ft for a small bistro set, 12 × 12 ft or larger for a dining table for six, and more for an outdoor kitchen. Larger spans need deeper beams or extra posts, which the per-square-foot range doesn’t capture well at the extremes.

Questions people ask

How much does a pergola cost?
Lawn Love puts the national average at about $4,000, with most installed pergolas between $2,100 and $6,000. Per square foot of covered area the typical range is $20–$60, averaging $37.
How much does a 12×12 pergola cost?
144 ft² at Lawn Love’s typical $20–$60 per ft² is $2,880–$8,640. By material, its averages per ft² are about $20 for vinyl or aluminum, $25 for pine, $30 for cedar, $45 for redwood and $60 for fiberglass, so a 12×12 cedar pergola averages around $4,300.
Is a wood or aluminum pergola cheaper?
Lawn Love’s per-square-foot averages are lower for vinyl and aluminum ($20) than for wood ($35 across species), but many aluminum pergolas are bought as kits with louvered roofs, which add $25–$130 per ft². Compare like for like: open-rafter wood vs. open-rafter aluminum.
Can a pergola go on my deck?
Only if the deck framing and footings are designed for it. A pergola adds weight, wind uplift and point loads at its posts, which the IRC prescriptive deck tables don’t cover. Use the deck load calculator and have the connection designed, or give the pergola its own footings.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. How Much Does a Pergola Cost? — Lawn Love, checked Nov 2026.
  2. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All outdoor tools →