Outdoor · Lawn

Sod Calculator & Cost

Pieces and pallets for your lawn, and the installed price with or without tearing out the old turf.

Costs checked: November 2026Sources

1 Lawn area
Shape
ft
ft
2 Sod sizes
Ask the farm; pallets vary
%
3 Location and labor

Region factor ×1.00: U.S. national average. How it’s derived

Who does the work
Low
$800
Typical
$1,400
$1.40 per ft²
High
$2,000
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Sod, installed1,000 sq ft$800$1,400$2,000
Split
Materials$300$650$1,000
Labor, equipment & overhead$500$750$1,000
Total installed$800$1,400$2,000
LawnStarter’s national average for a basic install is $1.65 per ft². Sod material here comes from its pallet price ($150–$450 for 450–500 ft²).

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

Sod order

Sod order
ItemQtyNotes
Sod pieces3941,050 ft² incl. 5%
Pallets32.19 pallets of 481 ft²
Lay sod within a day of delivery and water it the same day.

How the sod calculator works

The quantity side is simple geometry: lawn area plus a cutting allowance, divided by the size of one piece, then by pieces per pallet. The cost side uses LawnStarter’s published figures, split honestly: material from its pallet price ($150–$450 for 450–500 ft², or $0.30–$1.00 per ft²) and labor of $0.50–$1.00 per ft². If you are preparing a new lawn from an old one, the soil-prep option adds $0.50–$1.00 per ft², the difference between LawnStarter’s basic-install and full-replacement ranges.

Pieces = ceil(area × (1 + waste) ÷ piece size) Pallets = ceil(pieces ÷ pieces per pallet) Cost = area × (material $0.30–$1.00 + labor $0.50–$1.00 [+ prep $0.50–$1.00]) × regional factor

Worked example: a 40 × 25 ft back lawn

  • 1,000 ft² + 5% = 1,050 ft². 16 × 24 in. slabs (2.67 ft²): 394 pieces. At 180 per pallet, 2.2 pallets, so 3 pallets (or ask for a part pallet).
  • Installed on prepared soil: $800 / $1,400 / $2,000. With turf removal and prep: $1,300 / $2,150 / $3,000.
  • DIY sod only: $300–$1,000 for the sod itself, plus delivery and a sod-cutter or tiller rental if you prep.

Prep makes or breaks a sod lawn

  • Kill or strip the old turf, then loosen the top few inches of soil and rake it level about ½–1 in. below walks and patios so the sod finishes flush.
  • Add topsoil where the ground is hard or low; the topsoil calculator works out how much.
  • Lay sod the day it arrives, staggering the joints like brickwork, and water it until the soil below is wet.

What changes the price

  • Grass type: specialty and shade-tolerant varieties cost more than common fescue or Bermuda blends.
  • Season and distance: sod is perishable, so delivery distance and peak-season demand matter.
  • Site: slopes need staking, small or narrow lawns need more cuts, and poor access slows the crew.

Sod vs. seed

Sod costs several times more than seed but gives an instant lawn, controls erosion on slopes immediately and can be laid through most of the growing season. Seed is cheaper and offers more variety, but needs weeks of watering and weeding before it fills in. For small repairs and shady areas, seed often works better; for a new lawn you want to use this season, sod usually wins.

Common mistakes

  • Ordering sod before the soil is ready; it starts to deteriorate on the pallet within a day or so in warm weather.
  • Laying sod on dry soil. Water the prepared soil lightly before laying.
  • Under-watering in the first two weeks. Keep the soil beneath the sod moist until the roots knit in.

Questions people ask

How much does sod cost per square foot installed?
LawnStarter puts a basic professional sod install at about $1.65 per ft² on average. From its pallet price ($150–$450 for 450–500 ft²) the sod itself is about $0.30–$1.00 per ft², and it puts labor at $0.50–$1.00, so a basic install runs about $0.80–$2.00 per ft². Removing the old lawn and preparing the soil adds about $0.50–$1.00.
How many square feet are in a pallet of sod?
Commonly 400–500 ft², but it depends on the farm and the cut: slabs of 16 × 24 in. (2.67 ft²) or 18 × 24 in. (3 ft²) and rolls of about 10 ft². Ask the supplier how many pieces are on their pallet and enter it.
How much extra sod should I order?
About 5% for a simple rectangle and 10% for curved beds and lots of edges, where you cut more pieces.
How much does 1,000 square feet of sod cost?
With the published figures, about $800–$2,000 installed on prepared soil (typical $1,400), or $1,300–$3,000 including removal of the old turf and soil prep, before your regional factor.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. How Much Does Sod Cost? — LawnStarter, checked Nov 2026.
  2. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All outdoor tools →