Roof Replacement Cost Calculator
Roof replacement cost from the footprint and pitch (or squares), by material, with your region applied and a regional benchmark project.
| Item | Quantity | Low | Typical | High |
|---|---|---|---|---|
| Asphalt shingles | 1,409 sq ft | $4,230 | $7,040 | $9,860 |
| Total installed | $4,230 | $7,040 | $9,860 |
Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.
How the estimate works
Roof prices scale with roof area, so the first job is getting the area right. From the footprint, overhang and pitch the calculator works out the sloped area exactly as the roofing calculator does, then multiplies by a published installed price per square foot for the material you choose, and by your region’s factor.
| Material | Installed per ft² of roof | Source |
|---|---|---|
| Asphalt shingles | $3 – $7 | HomeAdvisor |
| Metal panels (exposed fastener) | $7 – $13 | HomeAdvisor |
| Standing-seam steel | $10 – $16 | Angi, 2026 (aluminum $11–$18, zinc and copper $25–$35) |
| Concrete tile | $9 – $18 | Angi, 2026 (materials $2–$4) |
| Clay tile | $8 – $25 | Angi, 2026 (materials $3–$7); This Old House puts clay near $21 |
These are installed prices including a normal tear-off, so we don’t split them into materials and labor. For DIY material costs, take the bundle, underlayment and flashing list from the roofing calculator to your supplier.
Worked example: 40 × 28 ft house, 6/12, Georgia
- Roof area 1,409 ft² (14.1 squares).
- Asphalt: 1,409 × $3 / $5 / $7 = $4,226 / $7,044 / $9,861. Georgia is South Atlantic (factor 0.983): about $4,150 / $6,920 / $9,690.
- Standing-seam steel: $14,087 / $18,313 / $22,539 nationally; about $13,850 / $18,000 / $22,160 in Georgia.
What pushes a roof quote up
- Layers: every extra layer of old shingles adds tear-off labor and dumpster weight.
- Decking: soft or delaminated sheathing is replaced per sheet once the old roof is off.
- Steepness and height: 8/12 and steeper, and second or third stories, need more safety equipment and time.
- Penetrations: chimneys, skylights, dormers and valleys all need flashing work.
- Ventilation and ice barrier: code upgrades required on tear-off, such as ridge venting or an ice barrier at the eaves (IRC R905.1.2).
Getting quotes you can compare
- Ask for the price per square and the number of squares, so differences in measurement are visible.
- Get the decking-replacement price per sheet in writing before work starts.
- Confirm the shingle line, underlayment, ice barrier extent, drip edge and ventilation are listed by name.
- Check that the roofer pulls the permit where one is required.
Repair or replace?
Isolated damage, such as a few missing shingles after a storm or a failed pipe boot, is a repair. Widespread curling, granule loss, multiple leaks or a roof near the end of its expected life usually justifies replacement, because patching an aging roof buys little time. A roofer’s inspection with photos is the best guide; insurance may cover storm damage, so document it before repairs.
Questions people ask
How much does a roof replacement cost?
How much does a metal roof cost?
What is a roofing square?
Why is my quote higher than these ranges?
Is a roof replacement worth it before selling?
Sources
Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.
- How Much Does Roof Replacement Cost? — HomeAdvisor, checked Nov 2026.
- How Much Does a New Roof Cost? — This Old House, checked Nov 2026.
- How Much Does a Standing Seam Metal Roof Cost? — Angi, checked Nov 2026.
- How Much Does a Tile Roof Cost to Install? — Angi, checked Nov 2026.
- Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.
Related calculators
All exterior tools →Roofing Calculator
Roof squares from the footprint and pitch, shingle bundles, underlayment, ice barrier and drip edge.
Roof Pitch Calculator
Pitch, angle, slope multiplier and rafter length, with the IRC minimum slope per roof type.
Gutter Cost Calculator
Gutters and downspouts by the foot in vinyl, aluminum, steel or copper.
Fascia & Soffit Cost Calculator
Fascia and soffit replacement by the linear foot, from your eave and rake lengths.
Siding Cost Calculator
Vinyl, fiber cement, engineered and wood siding: wall area, squares, materials and labor.
Window Replacement Cost Calculator
Cost per window by frame material and count, with a regional benchmark project.