Exterior · Siding cost

Siding Cost Calculator

Wall area from the house dimensions, then installed siding cost by material, with materials and labor shown separately.

Costs checked: November 2026Sources

1 House walls
ft
ft
About 9 ft per story
ft
:12
2 Location and labor

Region factor ×1.00: U.S. national average. How it’s derived

Who does the work
Low
$11,300
Typical
$28,240
$10.00 per ft²
High
$45,180
Region
×1.00
U.S. national average
Cost breakdown
ItemQuantityLowTypicalHigh
Vinyl2,824 sq ft$11,300$28,240$45,180
Split
Materials$8,470$21,180$33,890
Labor, equipment & overhead$2,820$7,060$11,300
Total installed$11,300$28,240$45,180
2,824 ft² of siding = 28.2 squares (walls 2,628 ft² after 21 ft² per door and 15 ft² per window, gables 196 ft²). Order 10% extra for cuts. Trim, soffit and old-siding removal are priced separately by most installers.
Benchmark: Cost vs. Value 2025 prices “Siding replacement (vinyl)” (1,250 ft² of vinyl with trim and house wrap) at $17,950 nationally. Its scope is upscale and complete, so it often sits near the top of our range.

Costs checked: November 2026. Ranges are published national figures (see Sources below) times the regional factor. They exclude permits, sales tax and unusual site work. Get at least three local quotes.

How the estimate works

Siding is priced per square foot of wall, so the calculator first measures the walls the way an estimator does: perimeter × height, minus standard openings, plus the gable triangles. It then applies HomeAdvisor’s published materials range for your siding type plus the published $1–$4 per ft² labor range, and your regional factor. Because the source publishes materials and labor separately, the result shows both.

Walls = perimeter × wall height − 21 ft² × doors − 15 ft² × windows Gables = number × ½ × gable width × (gable width ÷ 2 × pitch ÷ 12) Cost = (walls + gables) × (materials + labor $/ft²) × regional factor

Worked example: a two-story 40 × 40 ft house

  • Perimeter 160 ft × 18 ft = 2,880 ft², minus 2 doors and 14 windows (252 ft²) = 2,628 ft².
  • Two 28 ft gables at 6/12: rise 7 ft, area ½ × 28 × 7 = 98 ft² each, 196 ft² total.
  • Siding area: 2,824 ft² = 28.2 squares.
  • Vinyl: materials $3 / $7.50 / $12 + labor $1 / $2.50 / $4 per ft² = $11,300 / $28,240 / $45,180 nationally.

Cost vs. Value’s 2025 vinyl project works out to about $14.36 per ft² (about $40,600 at this size), between our typical and high values, because its scope includes tear-off, trim and house wrap. The low end assumes basic vinyl on a simple house with no repairs; the high end premium insulated vinyl and a complicated house.

Siding materials compared

  • Vinyl: lowest maintenance and cost; quality varies a lot with thickness. Insulated vinyl costs more.
  • Fiber cement: fire-resistant and durable; heavy, so labor runs higher. Usually painted.
  • Engineered wood: the look of wood at lower cost; needs paint and good flashing details.
  • Wood (cedar lap, shingle, board-and-batten): widest price range and the most upkeep.

Costs that are often extra

  • Tearing off and disposing of the old siding, especially if it contains asbestos (older cement shingles).
  • Repairing sheathing and adding a water-resistive barrier.
  • Trim, corners, soffit and fascia (see the fascia & soffit calculator), and window wraps.
  • Painting, for fiber cement and wood that isn’t factory finished.

Getting comparable siding quotes

  • Ask each contractor for the square count they measured; differences of a few squares explain many price gaps.
  • Confirm the product line and thickness, house wrap, trim, corners and window wraps by name.
  • Ask how rotten sheathing will be priced if they find it.

Questions people ask

How much does vinyl siding cost installed?
HomeAdvisor’s 2026 siding figures put vinyl materials at about $3–$12 per ft² and siding labor at $1–$4, so roughly $4–$16 per ft² installed, typically about $10. Cost vs. Value 2025 prices replacing 1,250 ft² of vinyl with trim and house wrap at $17,950 nationally, about $14.36 per ft².
How do I measure my house for siding?
Multiply the perimeter by the wall height to the eaves, subtract about 21 ft² per door and 15 ft² per window, and add each gable triangle (½ × width × rise). Divide by 100 for squares. Order about 10% extra for cuts and waste.
How much siding do I need for a 2,000 sq ft house?
Living area doesn’t tell you wall area: a two-story 2,000 ft² house has far less roof but similar wall area to a sprawling ranch. Measure the walls. A 40 × 40 ft two-story house with 18 ft walls, two gables and 16 openings has about 2,800 ft² of siding.
Is fiber cement worth the extra cost over vinyl?
Fiber cement costs more (about $5–$14 per ft² for materials versus $3–$12 for vinyl) and takes more labor because it is heavy, but it resists fire and impact better and holds paint well. In Cost vs. Value 2025, fiber-cement siding replacement recouped a higher share of its cost at resale than vinyl did.

Sources

Costs checked: November 2026. Each range is the published figure from the source named next to it; where we did arithmetic on a published figure the page says so. Regional factors: how they’re derived.

  1. Siding Cost Estimator — HomeAdvisor, checked Nov 2026.
  2. How Much Does It Cost to Replace or Install Siding? — Angi, checked Nov 2026.
  3. Cost vs. Value 2025: national and regional data — Remodeling magazine / Zonda (JLC), checked Nov 2026. Job costs for 13 projects in 9 Census divisions; used for regional factors and benchmark projects.

Related calculators

All exterior tools →